Molino de viento

Precios $800.00 c/u - In stock

CONDOR SERIES WIND TURBINES
Featuring our #SC120 - Our only PMA that works on large blades.

SEE THE NEW SUPER CONDOR! MODEL #C12 With Higher Voltage Coil


Even in a pathetically low breeze of only 1.8 MPH there is not
even enough power to get standard wind turbines spinning!
However the Condor® was specially developed to actually
make some power in many of the wind starved areas of the world.

The incredible advantage of having a wind turbine with the Condor's type of design features is that it will literality keep turning and charging 24 hours a day! . This was largely due to the fact they literally never stopped turning thus effectively staying clean and making power all the time. The Condor will operate on any tiny breeze that crosses it's path, relentlessly spinning day and night the Condor seam's to turn virtually any light breezes into usable power! Since it is actually a very rare sight to see Condor blades completely stop turning they can do what solar panels could never hope to accomplish in most cloudy northern areas!!!

While there is not much Wattage in a 1.8 MPH
breeze it's important to remember a Condor is
always charging! This aspect really counts in the
long run as you will come to appreciate, having
continuous power day and night.

Be warned that a Condor wind turbine will only make 200 Watts max! While the Condor averaged 10 to 25 Watts during testing on a typical northern morning that only averaged 1.8 to 4.6 MPH winds, it ONLY topped out at about 200 Watts maximum when the wind finally hit 25 MPH later on in the afternoon. Remember that the Condor is an EXTREMELY specialized type of wind turbine and was specifically designed to be used in ONLY super low wind zones

(Note: Condors can make 600 Watts at 55 MPH but at these wind speeds you will need a VERY tough tower system!!! The Condors include double thick hubs that can easily handle storms IF your tower can! Build your towers tough!!!) Maximum wind speed is 55 MPH. After 55 MPH your Condor towers must be able to fold down before hurricanes or storms hit with even higher winds so design your Condor tower for easy up and down action especially if you live in Florida!!!

Warnings;
PMA's are very polarity sensitive. Make sure you connect positive to positive when making your final battery connection!!! If you see sparks coming from the connector at the time of electrical hook up you may have the positive lead going to negative side of the battery. This may cause fires and burn out the coils in your PMA immediately.

Please note that these blades are very sharp and can cause severe injury if handled improperly. Treat these blades with the same respect you would have for a sharp sword.

These blade sets can turn at well over 2000 RPM on a windy day and can cause severe bodily injury when they are spinning. Use extreme caution! Never mount or work on a wind turbine on a windy day. Never place a turbine in any area that can be accessed by inexperienced persons or children. We assume no liability for ANY injuries caused by these products.

NOTE: WIND TURBINES SHOULD BE LOWERED BEFORE ANY STORMS OR HIGH WINDS HIT!
Build your towers to come down quickly and safely in storms or when high wind conditions are coming.
These turbines Should be taken down before winds get to 50 MPH. Condors are highly specialized low wind
speed turbines that are great for low wind areas but they can't take high winds and are not designed to endure storms!
KEEP UNUSED TURBINES UNDER ELECTRIC LOAD. (Short out wires to prevent free spinning)
(SHORT OUT THE PMA's POWER WIRES TOGETHER WHEN NOT IN USE OR
BEFORE PERFORMING EMERGENCY LOWERING OF TOWERS IN WINDY WEATHER)